03-12-2020 09:02 AM
I have systems in VLAN10 and VLAN20 which can talk inside their networks, but not to each other which is how I want, but I have a server (10.10.30.100) which I need all machines, on both VLANs, to be able to access as it'll be a kind of DNS server. I have tried giving the access port the default VLAN of 1, as well as making the port a trunk, but it doesn't resolve back on a PING.
Please can you assist? Thank you.
03-12-2020 09:16 AM - edited 03-12-2020 09:18 AM
Hi
is ip routing enabled ?
for vlans to speak to each other at layer 3 , there needs to be some form of layer 3 device or the switch itself if acting as the layer 3 should have ip routing enabled on it
Complete these steps in order to configure a switch to perform interVLAN routing.
Enable routing on the switch with the ip routing command. Even if IP routing was previously enabled, this step ensures that it is activated.
Switch(config)#ip routing
03-12-2020 11:16 AM
03-12-2020 11:52 AM
Hello,
can you post the Packet Tracer simulation ? Upload the (zipped) .pkt file...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide