sg350 - change from layer 2 to 3

[robertkwild]

hi all,

whats the terminal command again to change from layer 2 to layer 3 as i want to add different ips to different vlans

is there a quick way of checking this information out ie if i do a "sh run" command?

thanks,

rob

[Seb Rupik · Accepted solution]

Hi there,

The SG350 is a layer3 switch.

You are thinking of the set system mode switch|router command present on the SG300. This is not required on the SG350.

cheers,

Seb.