03-14-2013 02:17 AM - edited 03-07-2019 12:14 PM
Hi all,
Question, is it possible to share an ACL over multiple switches? We have a C3750 stack, a couple of C3560s and 2 C3550s. I want to make an ACL for our Access Points and place it on the ports to which the Access Points connect. It would help if I could share one ACL with all switches.
Or is there an easy way to restrict connection to a port to one device without setting a MAC Address?
Thanks in advance
Chris
Solved! Go to Solution.
03-14-2013 02:24 AM
Are they lightweight aps connected to a controller? If so you could use port security to limit the Mac count to 1.
Sent from Cisco Technical Support iPad App
03-14-2013 02:51 AM
Change an ap? Do you mean remove one from a switchport and attach another? If you shut/ no shut the switchport the port security will relearn.
Sent from Cisco Technical Support iPad App
03-14-2013 02:24 AM
Are they lightweight aps connected to a controller? If so you could use port security to limit the Mac count to 1.
Sent from Cisco Technical Support iPad App
03-14-2013 02:40 AM
Indeed, we do have a WLC and all APs are leightweight.
What happens if we have to change an AP?
03-14-2013 02:51 AM
Change an ap? Do you mean remove one from a switchport and attach another? If you shut/ no shut the switchport the port security will relearn.
Sent from Cisco Technical Support iPad App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: