Should you manually configure System Priority for VPC running LACP

[CiscoBrownBelt]

So I will have some server hosts ports configured with LACP port-channels. Should I configure a system priority let's say 40000 under all VPC domain configs for the Core and Access switch VPC domains?

Is 40000 a better number to use other than the default system priority?

[Reza Sharifi]

That is an optional command and usually, the default (32667) is fine.

https://www.cisco.com/c/en/us/products/collateral/switches/nexus-5000-series-switches/configuration_guide_c07-543563.html

HTH