Hello,
We notice the following difference on C3750 and C3650
C3750
Dot1x Info for FastEthernet1/0/3
-----------------------------------
PAE = AUTHENTICATOR
PortControl = AUTO
ControlDirection = Both
HostMode = MULTI_AUTH
QuietPeriod = 60
ServerTimeout = 0
SuppTimeout = 600
ReAuthMax = 2
MaxReq = 2
TxPeriod = 600
Dot1x Authenticator Client List
-------------------------------
Supplicant = c81f.662a.7474
Session ID = 0A01C81F000064BC9D9482F9
Auth SM State = AUTHENTICATED
Auth BEND SM State = IDLE
Port Status = AUTHORIZED
Supplicant = 0007.3bc8.ac63
Session ID = 0A01C81F00003B6DEDC33682
Auth SM State = AUTHENTICATED
Auth BEND SM State = IDLE
Port Status = AUTHORIZED
On C3650, the same command gives a shorter reply, and no more port status. Can you explain why? And how to apply the C3750 troubleshoot process on C3650, in the absence of Port Status =
Dot1x Info for GigabitEthernet1/0/4
-----------------------------------
PAE = AUTHENTICATOR
QuietPeriod = 60
ServerTimeout = 0
SuppTimeout = 600
ReAuthMax = 2
MaxReq = 2
TxPeriod = 600
Dot1x Authenticator Client List
-------------------------------
EAP Method = PEAP
Supplicant = f04d.a231.fce9
Session ID = 0A01C8840000013C74787098
Auth SM State = AUTHENTICATED
Auth BEND SM State = IDLE
EAP Method = MD5
Supplicant = 0007.3bc8.a9a9
Session ID = 0A01C8840000001C22CA8772
Auth SM State = AUTHENTICATED
Auth BEND SM State = IDLE
Nevertheless, the configuration guide of the C3650 still shows the STATUS = as being in.
Excerpt below from http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_usr_8021x/configuration/xe-3se/3650/sec-user-8021x-xe-3se-3650-book/config-ieee-802x-pba.html
Device# show dot1x interface fastethernet7/1 details
Dot1x Info for FastEthernet7/1
-----------------------------------
PAE = AUTHENTICATOR
PortControl = AUTO
ControlDirection = Both
HostMode = SINGLE_HOST
ReAuthentication = Disabled
QuietPeriod = 60
ServerTimeout = 30
SuppTimeout = 30
ReAuthPeriod = 3600 (Locally configured)
ReAuthMax = 2
MaxReq = 2
TxPeriod = 30
RateLimitPeriod = 0
Dot1x Authenticator Client List
-------------------------------
Supplicant = 1000.0000.2e00
Auth SM State = AUTHENTICATED
Auth BEND SM Stat = IDLE
Port Status = AUTHORIZED
Authentication Method = Dot1x
Authorized By = Authentication Server
Vlan Policy = N/A
Tx.
Version info:
C3650 = 03.06.04.E
C3750 = 12.2(55)SE6
