We are trying to setup Smart Install and having a problem with TFTP. When we boot a new switch, it appears that the switch does not try to download it's config from the TFTP server (which is not on the director) but tries to download it's config from the director. The director is a 3750-48p and the client is a 2960-24TC-S. These switches are on their own network, no router is connected. The TFTP server is running on the workstation that is directly connected to the 3750 (running Tftp32) which has a connection to the 2960. Here is our config:
Workstation
Tftp32 - 172.16.6.6
3750
interface vlan1
ip address 172.16.6.8 255.255.255.0
vstack group built-in 2960 24
config tftp://172.16.6.6/2960-24-built-in-config.txt
vstack group built-in 3560 24
config tftp://172.16.6.6/3560-24-built-in-config.txt
vstack dhcp-localserver pool1
address-pool 172.16.6.0 255.255.255.0
file-server 172.16.6.6
default-router 172.16.6.1
vstack dhcp-localserver pool
vstack director 172.16.6.8
vstack basic
2960
Messages
AUTOINSTALL: Vlan1 is assigned 172.16.6.1
AUTOINSTALL: Obtain tftp server address (opt 150) 172.16.6.8 <--director not tftp server
Loading client_cfg.txt from 172.16.6.8 (via Vlan1)
