Hi All,
after enabling the SNMPV3 on cisco Router SNMP which is already enabled on the router stops responding to Poll. Need a suggestions
Configs from Router (community string is hided)
sh star | in snmp
snmp-server engineID local 80000009040A12F672
snmp-server group ### v3 auth read ###
snmp-server view ###internet included
snmp-server community ### RO 3
snmp-server community ### RO 5
snmp-server community ### RW 5
snmp-server community ### RO 2
snmp-server community ### RW 1
snmp-server community ### RO 3
snmp-server community ### RO 3
snmp-server ifindex persist
snmp-server trap-source Loopback0
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps ospf state-change
snmp-server enable traps ospf errors
snmp-server enable traps flash insertion removal
snmp-server enable traps envmon
snmp-server enable traps bgp
snmp-server enable traps memory bufferpeak
snmp-server enable traps config
snmp-server enable traps entity
snmp-server enable traps hsrp
snmp-server enable traps cpu threshold
snmp-server enable traps syslog
snmp-server host 10.132.17.254 ####
snmp-server host 10.132.17.18 ###
snmp-server host 10.193.204.158 version 3 auth ###
snmp-server host 10.193.204.159 version 3 auth ###
snmp mib community-map C1scoCsp engineid 0000000902000004C16AE9E0
snmp mib community-map ### engineid 0000000902000004C16AE9E0
snmp mib community-map ### engineid 0000000902000004C16AE9E0
snmp mib community-map ### engineid 0000000902000004C16AE9E0
snmp mib community-map ### engineid 0000000902000004C16AE9E0
snmp mib community-map ### engineid 0000000902000004C16AE9E0
snmp mib community-map ### engineid 0000000902000004C16AE9E0
