SNMP v3 configuration

[clark white]

Dears

I have read many post but still confused for snmp v3 configuration, can anybody route me to the clear explanation example for snmpv3 on 2960 switches.

Below is the configuration . please correct if it is wrong

snmp-server group admin v3 auth write adminview write adminview
snmp-server user snmpuser admins v3 auth md5 cisco access 10

snmp-server view adminview internet included

Thanks

[Reza Sharifi]

Hi,

Here is an example of the command to enable v3

snmp-server host 192.180.1.27 informs version 3 auth authuser config

Config guide:

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_55_se/configuration/guide/scg_2960/swsnmp.html

HTH