Hi
When I am configuring my Cisco 1900 router for SNMPv3 ( migrating from snmp v2 to v3), the router is still sending SNMPv2 traps.
SNMPv2 config
snmp-server community STRING RO
snmp-server community public RO
snmp-server trap-timeout 180
snmp-server enable traps tty
snmp-server enable traps entity-sensor threshold
snmp-server host 192.168.10.18 STRING
SNMP V3 Config
snmp-server engineID local 192168000122
snmp-server trap-source loopback0
snmp-server enable traps snmp
snmp-server group branch v3 priv read v1default notify v1default
snmp-server view v1default iso included
snmp-server user netmon branch v3 auth md5 password priv des password
snmp-server host 192.168.7.40 trap version 3 auth netmon snmp
snmp-server host 192.168.7.40 inform version 3 auth netmon snmp
snmp-server host 192.168.23.40 trap version 3 auth netmon snmp
snmp-server host 192.168.23.40 inform version 3 auth netmon snmp
I removed snmpv2 by doing no to all the commands and the did no snmp-server. After this I configured SNMP v3.
After the configuration when I enable the logs I am able to see the router is still sending the SNMPv2 traps
Please find some of the details which may be benifitial
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.2(3)T1, RELEASE SOFTWARE (fc1)
PSIB0000122#sh snmp user
User name: netmon
Engine ID:192168000122
storage-type: nonvolatile active
Authentication Protocol: MD5
Privacy Protocol: DES
Group-name: branch
Thanks Muklit