04-12-2016 12:46 PM - edited 03-08-2019 05:20 AM
Hi, I have been trying to update from 15-0(2a)-ex5 to 15-2-2E4 using the Cisco Network Assistant. The tar file I download for my switch model is deemed not for my switch model and claims it needs to be a tar file. If anyone could assist in this matter, I'd greatly appreciate it!
Thank you!
Larry
04-13-2016 02:34 AM
maybe your downloaded file is corrupted, have you looked at the checksumms? try to download it again..i also would try (if possible) a manual upgrade via cli.
regards,
Andreas
04-14-2016 07:46 PM
To manually upgrade via cli you either need to have the file loaded onto a USB key that the switch will recognize or on a tftp server on the network
!usb flash upgrade:
archive download-sw /overwrite /imageonly usbflash0:name_of_tar_image_file.tar
!tftp upgrade:
archive download-sw /overwrite /imageonly tftp://IP_of_tftp/name_of_tar_image_file.tar
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide