Hello!
I have cat 6500 with SUP32-GE-3B/MSFC2A/PFC3B, s3223-adventerprisek9-mz.122-33.SXJ6.bin,
and WS-X6148-GE-TX module.
And I have a couple of 3750G.
On all of 3750G there is a broadcast filtering of VLAN 4000, and it's working:mac access-list extended badhosts
permit any host ffff.ffff.ffff
vlan access-map dropbad 10
action drop
match mac address badhosts
vlan access-map dropbad 20
action forward
vlan filter dropbad vlan-list 4000
Then i copy this config to 6500, and it's not working. I configured two ports, one is switchport access vlan 4000
and other is switchport capture allowed vlan 4000
, and i see on both ports same broadcast traffic. Filter is working, but packets are not dropping. I've tried to find something in manual, but found only about platform cwan acl software-switched
, enabled it, nothing changed.
cat6500# sh vlan filter
VLAN Map dropbad:
Configured on VLANs: 4000
Active on VLANs: 4000