01-30-2023 01:44 AM - edited 01-30-2023 11:50 PM
I have to delete the post, my internship supervisor asks
to do so in case I accidentally give information on the network and it would cause big problems
since it is a psychiatric hospital.
Thank you all the same to all of you, you have at least enlightened me on the solution!
If a moderator could delete the post that would be great.
Have a great day/evening everyone!
01-30-2023 01:51 AM
- If you want to connect with PuTTY through SSH (e.g.) , then you will need extra configuration commands , check this document : https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst1000/software/releases/15_2_7_e/configuration_guides/sec/b_1527e_security_c1000_cg/configuring_ssh.html
M.
01-30-2023 02:03 AM
Thanks you but im in a Serial connection and i don't have any problems with the connection, as i said, i have a problem importing a configuration !
But thank you for trying helping me !
01-30-2023 02:10 AM - edited 01-30-2023 02:11 AM
VLAN 144 is missing from the VLAN database.
Add the following command: ip tftp source VLAN 144
01-30-2023 02:41 AM - edited 01-30-2023 11:51 PM
I think the command did his things but the connection from the switch to the PC is still missing, if u want some screenshots :
01-30-2023 02:56 AM
Catalyst 1000 has a USB Type-A slot which can be used to transfer files to- and from the switch using a ubiquitous USB flash drive.
01-30-2023 03:47 AM
Can you explains me more in details how can i do it please ? I'm a total beginner
01-30-2023 04:05 AM
- Get acquainted with this information : https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst1000/software/releases/15_2_7_e/configuration_guides/sys_mgmt/b_1527e_sys_mgmt_c1000_cg/working_with_the___cisco_ios_file_system__configuration_files__and_software_images.html
M.
01-30-2023 05:04 AM
Ok, so i jsut plug my USB key with the configuration i want to import into the switch, searched and searched but didn't saw any solutions on internet, even the forum marce1000 send me ! Did i have to do the thing where i unplug the switch electricity cable and replug it + press on the front button for 10+ sec ?
01-30-2023 06:17 AM
In the original post we are told that pc can ping the switch. That would seem to indicate that there is a connection between pc and switch. We are told that switch can not ping pc. That is not necessarily a problem. It is not unusual for a pc to be running a firewall which does not allow ping to the pc. To check this out please do this:
- ping switch from pc.
- on switch do show arp (or perhaps show ip arp depending on os) and post output
01-30-2023 06:22 AM - edited 01-30-2023 11:52 PM
Thanks mate, i was scared that i screw something on the switch but hopefully there are guys that know how it work on forum like this ! there is the screenshot :
01-30-2023 07:52 AM
Thanks for the output. It was not what I expected. Can you confirm that the pc is able to ping the switch? Would you post the output of show interface status on the switch?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide