Hi guys,
I am missing something here, need your help/advise on this.
From my LAN router I can do the trace route to my esrver located in another site. However from the same router, I am not able to do the source based trace route from one of its interface to same server. Could you tell me what I am missing here.
RouterA# trace 10.6.49.165
Type escape sequence to abort.
Tracing the route to 10.6.49.165
1 10.5.86.7 0 msec 4 msec 0 msec
2 10.3.18.3 4 msec 4 msec 4 msec
3 20.232.9.101 4 msec 92 msec 132 msec
4 20.232.6.41 36 msec 40 msec 40 msec
5 20.232.6.42 40 msec 40 msec 40 msec
6 10.6.6.20 80 msec 40 msec 44 msec
7 10.6.50.2 56 msec 60 msec 64 msec
8 10.6.49.165 60 msec 56 msec 48 msec
RouterA#trace ip
Target IP address: 10.6.49.165
Source address: 17.21.1.4
Numeric display [n]:
Timeout in seconds [3]:
Probe count [3]:
Minimum Time to Live [1]:
Maximum Time to Live [30]:
Port Number [33434]:
Loose, Strict, Record, Timestamp, Verbose[none]:
Type escape sequence to abort.
Tracing the route to 10.6.49.165
1 10.5.86.7 0 msec 4 msec 0 msec
2 10.3.18.3 4 msec 0 msec 4 msec
3 * * *
4 * *
Does the router 20.232.9.101 needs to have route for 17.21.1.4 subnet. It can reache routerA on its other interface IP address.
