Stacking 3750 and 9200

mlynch_32 · ‎06-24-2020

I have 4 Cisco 3750 switches, stacked. I need to add another switch for growth. Can you add/stack a Cisco 9200 series switch with the Cisco 350 series switches?

Martin L · ‎06-24-2020

No, stacking must be within the same model; besides that I don't think stack-wise cables will fit into ports; you will not be able connect 9200 to 3750 or 2960x.

Regards, ML
**Please Rate All Helpful Responses **

paul driver · ‎06-24-2020

Hello

@mlynch_32 wrote:

I have 4 Cisco 3750 switches, stacked. I need to add another switch for growth. Can you add/stack a Cisco 9200 series switch with the Cisco 350 series switches?

No stacking between the two models is applicable, However you can connect them together via copper or fibre links.

Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul

Deepak Kumar · ‎06-24-2020

Hi,

answer is no

Regards,
Deepak Kumar,
Don't forget to vote and accept the solution if this comment will help you!

Joseph W. Doherty · ‎06-25-2020

As the other posters have noted stacking, at least physical stacking, while creating on logical device (like your existing four unit 3750 stack?) cannot be done between the different series of Catalysts.

It might be possible, however, to manage your 3750 and 9200 as one logical device, but I'm unsure they support this feature.