Storm command model 2960G

[alexisbonilla84]

Is there any way to apply this command on these switch models?

Or can you suggest a comment that does not generate a loop on the ports?

[MHM Cisco World]

This need for port connect to hosts 

Spanning tree portfast 

Spanning tree bpdu guard enable 

[alexisbonilla84]

do you know how to use this command on an interface?

[Flavio Miranda]

Hi @alexisbonilla84 

 By storm do you mean "storm control" ? If so, you can use the command

nterface interface-id

storm-control unicast level 87 65

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_55_se/configuration/guide/scg_2960/swtrafc.html#71262