SUPERVISOR WS-X45-SUP7-E REDUNDANCY, STATUS LED ORANGE?!?

[abigi]

hi all,

i have a 4510R+E with 2 SUPERVISOR WS-X45-SUP7-E configured in redundancy mode.

The status leds of 2 supervisor is orange and don't become green!!

Can you help me?

Below you can see the redundancy configuration:

redundancy
 mode sso
 main-cpu
  auto-sync startup-config

Thanks to all!!!

Alberto.

[Madhukrishnan Gopinathan Nair]

What is the module status from Switch?

sh module

[abigi]

FERCAM_4510#sh module
Chassis Type : WS-C4510R+E

Power consumed by backplane : 40 Watts

Mod Ports Card Type                              Model              Serial No.
---+-----+--------------------------------------+------------------+-----------
 2    48  10/100/1000BaseT EEE (RJ45)            WS-X4748-RJ45-E    CAT1908L9HK
 3    48  10/100/1000BaseT EEE (RJ45)            WS-X4748-RJ45-E    CAT1903L5R5
 4    48  10/100/1000BaseT EEE (RJ45)            WS-X4748-RJ45-E    CAT1906L6Z7
 5     4  Sup 7-E 10GE (SFP+), 1000BaseX (SFP)   WS-X45-SUP7-E      CAT1910L326
 6     4  Sup 7-E 10GE (SFP+), 1000BaseX (SFP)   WS-X45-SUP7-E      CAT1910L2SX

 M MAC addresses                    Hw  Fw           Sw               Status
--+--------------------------------+---+------------+----------------+---------
 2 84b8.024b.8a10 to 84b8.024b.8a3f 1.1                               Ok      
 3 84b8.024b.8e30 to 84b8.024b.8e5f 1.1                               Ok      
 4 84b8.024b.8a40 to 84b8.024b.8a6f 1.1                               Ok      
 5 74a2.e680.2dc0 to 74a2.e680.2dc3 3.0 15.0(1r)SG5  03.07.00.E       Ok      
 6 74a2.e680.2dc4 to 74a2.e680.2dc7 3.0 15.0(1r)SG5  03.07.00.E       Ok      

Mod  Redundancy role     Operating mode      Redundancy status
----+-------------------+-------------------+----------------------------------
 5   Active Supervisor   SSO                 Active                           
 6   Standby Supervisor  SSO                 Standby hot                      

System Failures:
----------------
Power Supply:   bad/off (see 'show power')

[abigi]

Any news? I have tried to change software but the led is Always orange!!!

It's all ok but leds are orange!!!!

[Madhukrishnan Gopinathan Nair]

Must be some cosmetic issue or bug.

I will see if there is some information or similar cases.

Thanks,

Madhu

[abigi]

Thank you so much for your help!!

[abigi]

You can see the show module:

FERCAM_4510#sh module
Chassis Type : WS-C4510R+E

Power consumed by backplane : 40 Watts

Mod Ports Card Type                              Model              Serial No.
---+-----+--------------------------------------+------------------+-----------
 2    48  10/100/1000BaseT EEE (RJ45)            WS-X4748-RJ45-E    CAT1908L9HK
 3    48  10/100/1000BaseT EEE (RJ45)            WS-X4748-RJ45-E    CAT1903L5R5
 4    48  10/100/1000BaseT EEE (RJ45)            WS-X4748-RJ45-E    CAT1906L6Z7
 5     4  Sup 7-E 10GE (SFP+), 1000BaseX (SFP)   WS-X45-SUP7-E      CAT1910L326
 6     4  Sup 7-E 10GE (SFP+), 1000BaseX (SFP)   WS-X45-SUP7-E      CAT1910L2SX

 M MAC addresses                    Hw  Fw           Sw               Status
--+--------------------------------+---+------------+----------------+---------
 2 84b8.024b.8a10 to 84b8.024b.8a3f 1.1                               Ok      
 3 84b8.024b.8e30 to 84b8.024b.8e5f 1.1                               Ok      
 4 84b8.024b.8a40 to 84b8.024b.8a6f 1.1                               Ok      
 5 74a2.e680.2dc0 to 74a2.e680.2dc3 3.0 15.0(1r)SG5  03.07.00.E       Ok      
 6 74a2.e680.2dc4 to 74a2.e680.2dc7 3.0 15.0(1r)SG5  03.07.00.E       Ok      

Mod  Redundancy role     Operating mode      Redundancy status
----+-------------------+-------------------+----------------------------------
 5   Active Supervisor   SSO                 Active                           
 6   Standby Supervisor  SSO                 Standby hot                      

System Failures:
----------------
Power Supply:   bad/off (see 'show power')

[danjotoole]

I think it has something to do with your bad power supply alarm. I have the same thing.

Dan