SVI

[iisraelivan]

Hi,

I have a small problem:

I have 2 SVIs in the same router 7600 cisco:

int vlan 466

ip add 10.10.10.1 /29

int vlan 3300

ip add 10.10.20.1/29

Connect 2 PCs in the same router 7600 cisco, one in each vlan:

1.-  ip 10.10.10.3, gw 10.10.10.1

2.- ip 10.10.20.5, gw 10.10.20.1

I can ping PC1 to PC2 and I can ping PC2 to PC1, but after when i want ping again PC1 to PC2 lost connectivity.

Why I lost connectivity when i ping the second time??

Can i help me, please. Thanks

[pwwiddicombe]

Can we see the output of the following command from PC1 when the ping fails?

tracert 10.10.20.5

This should show if the gateway or remote address isn't responding.

[iisraelivan]

sure,

The first hop is to SVI 466 (gw) 10.10.20.1 and the second hop is timeout request. Is when fails

But when i can do ping the first hop is 10.10.20.1 and the second hop is the host 10.10.20.5.

Thanks

[iisraelivan]

i forgot,

i can ping from PC1 and PC2 both SVIs 10.10.10.1 and 10.10.20.1 always, never lost connectivity