switch cisco 3650 support nat

[#1]

hi

the cisco 3650 with ipservice support nat?if the answer is not why is permiited programing the feature

Building configuration...

Current configuration : 4709 bytes
!
! Last configuration change at 18:42:47 UTC Mon Jun 12 2017
!
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
service compress-config
!
hostname SW
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-vrf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable secret 5 $1$GBgR$bew7LgnpusR2UKewSGAgJ.
enable password 7 1524580B50787B757F
!
no aaa new-model
switch 1 provision ws-c3650-24ps
!
!
!
!
!
ip routing
!
no ip domain-lookup
ip dhcp excluded-address 192.168.0.1
!
ip dhcp pool XXXX
 network 192.168.0.0 255.255.255.0
 dns-server 8.8.8.8
 default-router 192.168.0.1
!
!
qos queue-softmax-multiplier 100
!
crypto pki trustpoint TP-self-signed-3021829882
 enrollment selfsigned
 subject-name cn=IOS-Self-Signed-Certificate-3021829882
 revocation-check none
 rsakeypair TP-self-signed-3021829882
!
!
crypto pki certificate chain TP-self-signed-3021829882
 certificate self-signed 01
  3082022B 30820194 A0030201 02020101 300D0609 2A864886 F70D0101 05050030
  31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
  69666963 6174652D 33303231 38323938 3832301E 170D3137 30353039 31393233
  31395A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
  4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D33 30323138
  32393838 3230819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
  8100D05E DD5C46D1 C6025B4F A9DD2CE7 AA93F006 478ADC34 16DD7DA9 2487FCF6
  E0A7FDC9 D9F28EBD D834BC3F 4176F199 58A3EC1C 0971FE50 95CE94FC C1E91FFD
  2AC3B58C 9699EEE1 44488031 753D4649 33B3CC33 63BEC8FC 816C7CDD 80CDAEDD
  B7AC560A CAEFDAED BFA26878 A8743EE0 174CC68A 6334DEAA 8C1877D0 384D8DB7
  5D130203 010001A3 53305130 0F060355 1D130101 FF040530 030101FF 301F0603
  551D2304 18301680 1492D5AB E46137DD BF8B4683 12F9A0D4 EEC41D98 26301D06
  03551D0E 04160414 92D5ABE4 6137DDBF 8B468312 F9A0D4EE C41D9826 300D0609
  2A864886 F70D0101 05050003 8181003C E1C38346 170C9F25 7E3C181A 9D4790B6
  56E01C00 4570E312 C73AEC89 E0383758 9BD9F588 03FB42F2 31B51D53 0C035D1D
  84CE0070 2416E43F 4177C423 7728D6E5 FB499E13 640CA50D 625AE664 2441DB93
  AFB12EE6 3CA73ED3 791A1197 5B53EAAA 741A06E8 6CC77B4A F20BB9C5 2E7FBB2B
  802D2DA0 82ADDF86 EC9DEA0D A53D06
        quit
diagnostic bootup level minimal
spanning-tree mode pvst
spanning-tree extend system-id
hw-switch switch 1 logging onboard message level 3
!
redundancy
 mode sso
!
!
!
class-map match-any non-client-nrt-class
!
policy-map port_child_policy
 class non-client-nrt-class
  bandwidth remaining ratio 10
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0
 vrf forwarding Mgmt-vrf
 no ip address
 negotiation auto
!
interface GigabitEthernet1/0/1
!
interface GigabitEthernet1/0/2
!
interface GigabitEthernet1/0/3
!
interface GigabitEthernet1/0/4
!
interface GigabitEthernet1/0/5
!
interface GigabitEthernet1/0/6
!
interface GigabitEthernet1/0/7
!
interface GigabitEthernet1/0/8
!
interface GigabitEthernet1/0/9
!
interface GigabitEthernet1/0/10
!
interface GigabitEthernet1/0/11
!
interface GigabitEthernet1/0/12
!
interface GigabitEthernet1/0/13
!
interface GigabitEthernet1/0/14
!
interface GigabitEthernet1/0/15
!
interface GigabitEthernet1/0/16
!
interface GigabitEthernet1/0/17
!
interface GigabitEthernet1/0/18
!
interface GigabitEthernet1/0/19
!
interface GigabitEthernet1/0/20
!
interface GigabitEthernet1/0/21
!
interface GigabitEthernet1/0/22
!
interface GigabitEthernet1/0/23
!
interface GigabitEthernet1/0/24
 no switchport
 ip address 189.201.134.218 255.255.255.254
 ip nat outside
 speed 100
 duplex full
!
interface GigabitEthernet1/1/1
!
interface GigabitEthernet1/1/2
!
interface GigabitEthernet1/1/3
!
interface GigabitEthernet1/1/4
!
interface Vlan1
 ip address 192.168.0.1 255.255.255.0
 ip nat inside
!
ip default-gateway 189.201.134.219
ip nat inside source list 10 interface GigabitEthernet1/0/24 overload
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
!
ip route 0.0.0.0 0.0.0.0 189.201.134.219
!
!
access-list 10 permit 192.168.0.0 0.0.0.255
!
!
!
banner motd ^CEL ACCESO  A ESTE EQUIPO ESTA RESTRINGIDO^C
!
line con 0
 stopbits 1
line aux 0
 stopbits 1
line vty 0 4
 login
line vty 5 15
 login
!
wsma agent exec
 profile httplistener
 profile httpslistener
!
wsma agent config
 profile httplistener
 profile httpslistener
!
wsma agent filesys
 profile httplistener
 profile httpslistener
!
wsma agent notify
 profile httplistener
 profile httpslistener
!
!
wsma profile listener httplistener
 transport http
!
wsma profile listener httpslistener
 transport https
!
ap group default-group
end

[Jon Marshall]

As far as I know it does not support NAT.

The commands may be there in the IOS but that does mean that the switch automatically supports them.

Jon

[Julio E. Moisa]

Hi Alejandro,

As Jon mentioned, this switch model does not support NAT, below you will find more information:

http://www.cisco.com/c/en/us/support/docs/ip/network-address-translation-nat/29283-166.html

:-)

[Leo Laohoo]

NAT function is the exclusive domain of the Routers and ASA/Firewalls.  

The commands is accepted but NAT is disabled in software.