Switch http GUI no more on IOS latest version?

[Teoh Chee Hin]

hi, anyone know that why there is no more http or https for the switches newer version? Switch mode: WS-C2960-24TC-L OLD IOS: c2960-lanbasek9-mz.122-44.SE6.bin NEW IOS: c2960-lanbasek9-mz.150-1.SE3.bin Switch model: WS-C2960S-48TS-L OLD IOS: c2960s-universalk9-mz.122-55.SE3.bin NEW IOS: c2960s-universalk9-mz.150-1.SE3.bin Even in my configuration, there is ip http server ip http secure-server before this, i able to browse the GUI, at least can see the traffic for every ports, now after upgrade to newer version, there is no more. Anyone can advise? I understand that it may not advise to use this http GUI for switches, however it will be good to present for those not technical knowledge On new switch GUI, refer to "1n.jpg" when i click on Web Console, it said page cannot be found, why? anyone please guide?

[Leo Laohoo]

Depends on how you upgraded the IOS.

The "quick" method is to copy the BIN file.  The "complete" method is to un-pack the entire TAR file which will include the HTML files.

[Teoh Chee Hin]

mm.. since i upgrade already, then how can I copy the html file? Can i copy from the old directory flash: c2960-lanbasek-mz.122-44.SE6 ? HOw to do that? Can you guide me the command? switch#sh flas Directory of flash:/     2  -rwx    11049093  Jul 14 2012 10:16:13 +08:00  c2960-lanbasek9-mz.150-1.SE3.bin     4  -rwx        736  Jul 14 2012 12:34:02 +08:00  vlan.dat     5  -rwx        1921  Aug 15 2012 14:28:14 +08:00  private-config.text     6  drwx        192  Mar 1 1993 08:09:00 +08:00  c2960-lanbasek9-mz.122-44.SE6   548  -rwx        4863  Aug 15 2012 14:28:14 +08:00  config.text   549  -rwx        4120  Aug 15 2012 14:28:14 +08:00  multiple-fs 32514048 bytes total (11043328 bytes free) switch#cd flash:c2960-lanbasek9-mz.122-44.SE6 switch#dir flash:c2960-lanbasek9-mz.122-44.SE6 %Error opening flash:/c2960-lanbasek9-mz.122-44.SE6/c2960-lanbasek9-mz.122-44.SE6 (No such file or directory) switch#dir Directory of flash:/c2960-lanbasek9-mz.122-44.SE6/     7  drwx        4672  Mar 1 1993 08:07:13 +08:00  html   546  -rwx    7075041  Mar 1 1993 08:09:00 +08:00  c2960-lanbasek9-mz.122-44.SE6.bin   547  -rwx        525  Mar 1 1993 08:09:00 +08:00  info 32514048 bytes total (11043328 bytes free) switch#

[Leo Laohoo]

Teoh Chee Hin wrote:
mm.. since i upgrade already, then how can I copy the html file? Can i copy from the old directory flash: c2960-lanbasek-mz.122-44.SE6 ? HOw to do that? Can you guide me the command? switch#sh flas Directory of flash:/     2  -rwx    11049093  Jul 14 2012 10:16:13 +08:00  c2960-lanbasek9-mz.150-1.SE3.bin     4  -rwx        736  Jul 14 2012 12:34:02 +08:00  vlan.dat     5  -rwx        1921  Aug 15 2012 14:28:14 +08:00  private-config.text     6  drwx        192  Mar 1 1993 08:09:00 +08:00  c2960-lanbasek9-mz.122-44.SE6   548  -rwx        4863  Aug 15 2012 14:28:14 +08:00  config.text   549  -rwx        4120  Aug 15 2012 14:28:14 +08:00  multiple-fs 32514048 bytes total (11043328 bytes free) switch#cd flash:c2960-lanbasek9-mz.122-44.SE6 switch#dir flash:c2960-lanbasek9-mz.122-44.SE6 %Error opening flash:/c2960-lanbasek9-mz.122-44.SE6/c2960-lanbasek9-mz.122-44.SE6 (No such file or directory) switch#dir Directory of flash:/c2960-lanbasek9-mz.122-44.SE6/     7  drwx        4672  Mar 1 1993 08:07:13 +08:00  html   546  -rwx    7075041  Mar 1 1993 08:09:00 +08:00  c2960-lanbasek9-mz.122-44.SE6.bin   547  -rwx        525  Mar 1 1993 08:09:00 +08:00  info 32514048 bytes total (11043328 bytes free) switch#

Good gosh.

The easiest way is to re-"install" the IOS file using the command "archive download-sw /over tftp:///IOS.TAR".

[Teoh Chee Hin]

Dear Leolaohoo, Thank a lot. Mmm.. but when we download from Cisco, the file is .bin, not in .TAR format As re-install it might take downtime, hard for us to get downtime, can guide me how to copy the html file and made it work?

[Leo Laohoo · Accepted solution]

but when we download from Cisco, the file is .bin, not in .TAR format

TAR file is the COMPLETE file which includes the BIN file and the HTML files.  

As re-install it might take downtime,

No it won't.  

can guide me how to copy the html file and made it work?

But I have already given you the command how to "un-pack" the TAR file into the switch in my last post.