cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
787
Views
0
Helpful
1
Replies

switchport Down Type 2960s / WS-C2960S-48FPS-L/15.0(1)SE2 / C2960S-UNIVERSALK9-M

Hello,

could you help me please to find a solution.(no Layer 1 problem)

cases:

1) PC Windows 7 directly to the switchport port status down down

2) PC Windows 7 over a small access switch netgear 6 port  the port status is up up

3) Printer directly to the switchport  port status up up

4) PC Windows 7 via Phone 7961 Port status up up

5) XP Shuttle pc directly to the switchport Port Status up up

could you help me please for the first case I need a solution to connect the PC s directly to the Switch ports

configuration:

1 Reply 1

Leo Laohoo
Hall of Fame
Hall of Fame

Hmmm ... I got  feeling you have a patch cable issue.   Can you please do a TDR?

Here's are the command combinations:

1.  Command:  test cable tdr interface ;

2.  Wait for about 5 to 7 seconds;

3.  Command:  sh cable tdr interface ;

4.  Please post the output

I'm suspecting your PC has a GigabitEthernet NIC card and Pair "D" could be either "short" or "open" status.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: