T1 Configuration (PPP)

[skhirbash]

I am getting a dual T1 CKTs (PPP) for my company and have installed one T1 CSU/DSU and will be installing the second one soon. I received the static IP addresses from the service provider and would like to know how to configure the two modules with PPP. The following is the sho inventory of the ISR.

2851-01#sh inventory

NAME: "2851 chassis", DESCR: "2851 chassis"

PID: CISCO2851 , VID: V04 , SN: FTX1231A0X6

NAME: "WAN Interface Card - DSU/CSU T1 Fractional (V2)", DESCR: "WAN Interface Card - DSU/CSU T1 Fractional (V2)"

PID: WIC-1DSU-T1-V2 , VID: 1.2, SN: FOC114054QV

NAME: "NME-XD-48ES-2S-P: EtherSwitch SM 48 10/100T PoE + 2 SFP", DESCR: "NME-XD-48ES-2S-P: EtherSwitch SM 48 10/100T PoE + 2 SFP"

PID: NME-XD-48ES-2S-P , VID: V01 , SN: FOC10505A20

Thanks in advance,

sK

[Collin Clark]

Something wrong with this?

http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=LAN%2C%20Switching%20and%20Routing&topicID=.ee71a04&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40^1%40%40.2cd3253f/3#selected_message