cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
8458
Views
5
Helpful
2
Replies
nazir8121
Beginner

traceroute mac equivalent command in NEXSUS

Hello All,

Is there any equivalent command for traceroute mac in Nexsus switches

ss1v-core-s03#traceroute mac e839.35ac.7010 e839.35ac.7010

Source e839.35ac.7010 found on ssfo-x110-c0-s03

1 ssfo-x110-c0-s03 (10.21.17.133) : Gi0/6 => Gi0/6

Destination e839.35ac.7010 found on ssfo-x110-c0-s03

Layer 2 trace completed

ss1v-core-s03#

2 REPLIES 2
AhmedSonba
Beginner

Hello Nazir,

I am not sure that this command is supported on the Nexus switches but I found a web site that explain how to do a

manual Layer 2 trace on the Nexus switches.please find the link below:

http://packetpushers.net/tracing-a-layer-2-path-on-cisco-nexus-switches/

Hope it will help

Ahmed Sonba

Hi Nazir

Ahmed is right .

Unfortunately, NXOS does not currently supported traceroute mac feature. 

Please note that this command relies on CDP information and has to be supported on all devices along the path to work correctly. 

Further documentation that describes "traceroute mac" feature can be found in the 6500 configuration guide:

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/l2trace.html

HTH,

Alex