12-07-2012 11:08 PM - edited 03-07-2019 10:28 AM
HI,
Please find the topology below is it write config to use both link simultaneously... (TRAFFIC LOAD SHEARING)
Regards
Suhas
12-12-2012 12:20 PM
I would check first what the real metric is.
show ip route 172.16.10.1 e.g.
if you need to double the metric to use both links, the variance should be correct, yes.
but for traffic sharing you have to add this command:
traffic-share balanced
mabye you check that Link too if my post is not enough for you.
http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009437d.shtml#var
_________________
pls. rate if helpful
12-12-2012 02:13 PM
traffic-share balanced is the default behavior though. So he needs that command or not depends on how the interfaces are configured no?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide