What is the meaning for the following policer infomation under "sh mls interface statistic"?Policer: Inprofile: 340 OutoProfile: 0 Does it mean 340 packets drop due to Inprofile police?
I am studying route summarization and am having an issue with my remote router automatically marking a route as default. Thanks in advance for any advice! Please advise if you require more settings from either router.Local Router:First I created a lo...
Hello,We want to puchase new Cisco ISR 1921/K9 . i want to know does it support the following sample IP-SLA commandsip sla 2icmp-echo 172.16.1.2timeout 500frequency 1ip sla schedule 2 life forever start-time nowtrack 10 rtr 1 reachabilitydelay ...
Hello there,I can't seem to find exactly what I need out in the forum - we have 6500's running IOS s72033-adventerprisek9_wan-mz.122-33.SXH5.bin and we want to upgrade to VTP 3. I had heard that vtp 3 does not run with a sup720-3b but I ...
Hi,looking advice about the redesign of our networks...To date, the network is based on two-tier architecture - collapsed core (6509 VSS#1), access switches for desktops (2950/2960) conected directly to core (via WS-X6748-GE-TX) and access switches ...
I have been getting attacked from Amsterdam and Australia.... I want to create an access-list but have a basic question as the cisco docs dont completely make sense to me...First off it says that all access-lists must end with a deny statement... The...
About 2 months ago I bought a Cisco 2509-RJ access server to work on my lab routers and was working fine. Today I turned it on and half way through starting up it seems to freeze. I can only find one instance of this happing to someone ells on a diff...
Hi,I want to connect 2 ISP links into one Gigabit-interface on my Router 2921, can any one tell me how to do that ? sub-interface creation is not possible on cisco 2921plz help me
I want to create an extended access-list because I may have been internally breached as I see SSH, UDP, TCP going back and forth in wireshark from unknown addresses. I have two questions.#1 - Can I block all protocols without explicitly naming all of...
Router 1 and Switch 1 form HSRP groupcan not ping virtual ip of HSRP in switch2can not see virtual mac address with sh ip arphttps://skydrive.live.com/redir?resid=E0ED7271C68BE47C!212 another thing i discover only using f0/0 and f0/1 of switch2 to co...
Hello Guys,I have already ordered a Cisco ISR 1921/K9. but as i read on cisco website, it is written that Cisco 1921/K9 only support (IP SLA Responder) feature.I dont know actually wat is sla-responder. but our requirement is we will connect tha...
Please suggestI have 1 interface FastEthernet0/1 which has public ip and connected to 2mb internet link.I want to create multiple vpn sessions with different peers having public ips.so I am creating multiple crypto maps with seq number and applying ...
Hi,Our network environment have Radware Aleton L4 switch, The Aleton L4 switch have one VIP ( the real servers of this VIP are 8 Windows 2008 servers ). All of clients ( at client VLAN ) will access to this VIP. The L4 switch and all of Windows 2008 ...
Hi everybodyThe command show controller cpu-interface according to my book shows the number of packets being forwarded to switch's cpu for processing.http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_55_se/commmand/refe...
