Hello, I am writing to you because I am having trouble configurign DHCP with OSPF. My network is set up like so:
My show run output for router 1 is currently:
interface FastEthernet0/0
ip address 200.10.10.97 255.255.255.224
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
duplex auto
speed auto
shutdown
!
interface Serial0/0/0
ip address 200.10.10.1 255.255.255.252
clock rate 64000
!
interface Serial0/0/1
no ip address
shutdown
!
interface Vlan1
no ip address
shutdown
!
router ospf 1
log-adjacency-changes
network 10.0.0.0 0.0.0.3 area 0
!
For the company router I have:
ip dhcp excluded-address 210.10.10.33 210.10.10.38
!
ip dhcp pool lan-a
network 200.10.10.32 255.255.255.224
default-router 200.10.10.33
dns-server 200.10.10.255
ip dhcp pool lan-b
network 200.10.10.64 255.255.255.224
default-router 200.10.10.65
dns-server 200.10.10.255
ip dhcp pool lan-c
network 200.10.10.96 255.255.255.224
default-router 200.10.10.2
dns-server 200.10.10.255
!
!
!
!
!
!
!
!
!
spanning-tree mode pvst
!
!
!
!
interface FastEthernet0/0
ip address 200.10.10.33 255.255.255.224
duplex auto
speed auto
!
interface FastEthernet0/1
ip address 200.10.10.65 255.255.255.224
duplex auto
speed auto
!
interface Serial0/0/0
ip address 200.10.10.2 255.255.255.252
!
interface Serial0/0/1
no ip address
shutdown
!
interface Vlan1
no ip address
shutdown
!
router ospf 1
log-adjacency-changes
network 10.0.0.0 0.255.255.255 area 0
Any help would be appriciated, as I have been trying to get this to work for the last few hours.
