I am working at a Customer Site that has a large Cisco switch fabric.
The customer purchased a Linksys switch model SRW224G4 recently and has asked me if we could hook this up to be part of our switch fabric.
I took a look at the configuration parameters on the Linksys switch. It has what looks to be some limited Trunking options, but I did not see VTP anywhere on it.
I created a trunk port on the Linksys switch and then configured a Trunk port using dot1Q on the Cisco switch and then connected the ports.
I have not had success so far.
Is it possible to trunk these switches together. I want to have the same VLANs on the Linksys as we have on the rest of our Cisco switch fabric...?