Solved: Re: Trunking issues

lazmird · ‎03-17-2023

Trunk setting

Hey can somebody tell me what's wrong with my trunk setting and by the way I have the same settings on switch 2 as well but the traffic is not passing between the SW1 and SW2.

Thank you in advance.

marce1000 · ‎03-17-2023

- Better is to show running-config concerning the involved ports also check logs on both SW1 and SW2 when trunk connection is made , also issue 'show interface status gi0/1" ; check if the interface(s) is/are in trunking mode (or not).

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

View solution in original post

marce1000 · ‎03-17-2023

- Better is to show running-config concerning the involved ports also check logs on both SW1 and SW2 when trunk connection is made , also issue 'show interface status gi0/1" ; check if the interface(s) is/are in trunking mode (or not).

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

lazmird · ‎03-17-2023

Thank you

MHM Cisco World · ‎03-17-2023

only allow VLAN1 in trunk
some vlan must allow in trunk to make trunk probably.