Hello,
we like to replace multiple 3560 by 2960XR. On one device we have established tunnel with a configuration looking like this:
interface Tunnel188
ip vrf forwarding group_221
ip address 10.1.183.2 255.255.255.0
load-interval 30
tunnel source 172.16.10.11
tunnel destination 172.16.14.11
ip route 0.0.0.0 0.0.0.0 10.10.30.1
ip route 172.16.14.0 255.255.255.240 172.16.10.9
ip route vrf group_221 0.0.0.0 0.0.0.0 Tunnel188
Is it possible to setup this configuration on 2960XR devices?
Kind regards
Andreas
