Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
we like to replace multiple 3560 by 2960XR. On one device we have established tunnel with a configuration looking like this:
interface Tunnel188 ip vrf forwarding group_221 ip address 10.1.183.2 255.255.255.0 load-interval 30 tunnel source 1...
Hi,our pair of Nexus7000 are configured with RSTP.On the Edge-Switches we have seen an STP topology change in all connected vlans.On N7k the topology has also changed what we`ve only seen in the output of the stp detailssh spanning-tree vlan 46 detai...
Hi,our server-team has established many new esx-server, without announcing us about this.So we are using overdraft licenses.After turning off older ESX-server we set free 2 licenses into the pool with this svs license transfer src-vem vem no licens...
Hi,on this switch WS-C4507R-Ewith this modules:1 WS-X4648-RJ45V+E2 WS-X4648-RJ45V+E3 WS-X45-SUP6-E4 WS-X45-SUP6-E5 WS-X4548-GB-RJ457 WS-X4648-RJ45V-Ei ve a problem: two Cisco AIR-LAP Accesspoints have been connected to modul2 ...
Hi,since yesterday we got a couple of this logging-events:Oct 23 08:09:01 bciscon7k01 : 2012 Oct 23 06:09:01 UTC: %ARP-3-INVAL_HDR_PROT_TYPE: arp [4290] Found incorrect protocol type in ARP header: 0x1000Oct 23 08:09:47 bciscon7k01 : 2012 Oct 23 06...
Modules 15 and 16 are not in use. i ve transfer this licenses back with: svs license transfer src-vem vem no license_pooli like to know how to relinquish the overdraft.
Hi Robert,here is the output:bciscon1kv01# show module vem missingNo missing module found.bciscon1kv01# show mod vem license-infoLicenses are StickyMod Socket Count License Usage Count License Version License Status--- ------------ ------...
Test is not possible, Logging-Event:%C4K_IOSDIAGMAN-4-TESTNOTSUPPORTEDONMODULE: Online cable diag tdr test is not supported on module 2%C4K_IOSDIAGMAN-4-TESTNOTSUPPORTEDONMODULE: Online cable diag tdr test is not supported on module 1But the cable is...
sh power inline Available:3244(w) Used:0(w) Remaining:3244(w)Interface Admin Oper Power(Watts) Device Class From PS To Device --------- ------ ---------- ---------- -----...
