One of my customer approached me stating that almost all his cisco devices encountered a vulnerability "The UDP port scan could not complete: The remote host has remained silent for too longThis might be due to a firewall filtering UDP and/or ICMP packets"
Anybody please help me with
1. Cause of this error
2. Significance/ Effect of this error on a particular network
3. How this error can be mitigated
Please help me in assisting the customer in the best possible way
Cisco recently announced availability of the latest release on the IOS-XE train IOS-XE 17.6.1. This release is the newest Extended Maintenance release on the Catalyst 9000 platforms, which will be supported for lifetime of 36 months. The EMR release would...
1-In single area, the routers have the Link State Database, having the same LSDB helps the routers to build a loop-free topology.2-Now in a multiarea topology, the ABRs are responsible for advertising an intra area route into another area as an inter-area...
Community Live-Application Hosting on ISR, ASR, CSR and Catalyst Routing Platforms
This event will have place on Tuesday 17th, August 2021 at 10:00 hrs PDT
Learn about Cisco’s ISR Fixed Platforms and how it fits into Cisco’s overall Branc...
To optimize the database description (DBD) packet exchange between two OSPF neighbors, use the compatible rfc5243 in router configuration mode or address family configuration mode for OSPFv3 AF. To disable RFC5243 optimization, use the no form of this com...
We said always that OSPF is a link-state routing protocol.For most engineer stuying CCNA or CCNP, OSPF is misunsdertanding.In reality, OSPF is a link-state routing protocol only within an area (intra-area); but almost a distance-vector routing protocol be...