01-19-2024 05:59 AM
I'm attempting to run the following ping command:
switch# ping 8.8.8.8 source-interface ethernet 1/48 count unlimited
Switch reply = ping: bad context
I can run standard ping successfully:
switch# ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
64 bytes from 8.8.8.8: icmp_seq=0 ttl=116 time=10.821 ms
64 bytes from 8.8.8.8: icmp_seq=1 ttl=116 time=10.629 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=116 time=10.298 ms
64 bytes from 8.8.8.8: icmp_seq=3 ttl=116 time=10.431 ms
64 bytes from 8.8.8.8: icmp_seq=4 ttl=116 time=10.489 ms
--- 8.8.8.8 ping statistics ---
5 packets transmitted, 5 packets received, 0.00% packet loss
round-trip min/avg/max = 10.298/10.533/10.821 ms
Not sure why the extended ping command isn't working, it's pretty standard, any suggestions?
01-19-2024 06:05 AM
dont use source-interface use source <IP of interface>
MHM
01-19-2024 07:23 AM
You may need to specify a VRF.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide