Switching

Hi,Can you help me in this ?I have two 10Gig modules.On 6500, i have X2-10GB-LRM  and on 3750-x i have SFP-10G-SR= . you can use it with fiber cable and patch cord to connect the two devices?thanks

 Hi How to fix  "SSL Medium Strength Cipher Suites Supported (SWEET32)" on the below cisco C6807-XLCisco IOS Software, s2t54 Software (s2t54-IPBASEK9-M), Version 15.2(1)SY1, RELEASE SOFTWARE (fc5)Technical Support: http://www.cisco.com/techsupportCop...

Hi,I have the below switch , how to disable week ciphers  in vapt   found  "SSH Weak Key Exchange Algorithms Enabled"  , how to disable week  weak algorithms WS-C2960X-24TD-L15.0(2)EX5C2960X-UNIVERSALK9-MThanks 

hi All,does any one have a workaround to get an AIR-AP 3802 working with Cat 2960S switch ?it complain that not POE even though we setup with external power injector and it won't connect to the WLCeven though we can see under CDP neighour.Any help is...

An error log has occurred on N9K recently. Please help to look into the cause.2022 Nov 24 15:38:26 DC_SW_9300_A %USER-3-SYSTEM_MSG: File Writing Failed for /mnt/pss/aaa_vdc_1.seqnum - aaad2022 Nov 24 15:38:29 DC_SW_9300_A Nov 24 15:38:29 %KERN-3-SYST...

I looked through the docs a bit, but couldn't find this.I have a Router that has 3 basic interfaces. 1 LAN, 1 WAN, and 1 Virtual template that VPN users use.I want to have the VPN users get IP addresses through a DHCP server (so we can pass specific...

I have 2 4900Ms, Cisco 1 - trunked to a new Juniper EX4600 and am testing a migration strategy. I setup IRBs with IP address on the Junos and trunked to the Cisco - works perfectly!  (IRB's are junos equivalent of interface vlan )The migration test w...

Community,I am facing a very interesting and strange Topology Change issue with Rapid spanning tree. Here is what I am noticing. On the Catalyst 9300-48P (17.6.3), I am seeing some port flapping on ports connected to AP's. These ports are configured ...

Hi, I would like to know if it's possible to do the same setting like this one but with dhcp gateway ?   ip route 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xxx track 1  ( Used at the moment with Static ISP from ISP )   We have a second site with no Static IP from ...

So I have a network where I need to do inter-Vlan routing. I wanted to ping a PC from a switch and I understand why you would need to configure a default gateway on the switch so that the ping can be sent correctly but what I have trouble understandi...