Unable to set hardware clock (system calendar) - Sup 7L-E

[szaboandraslnx]

Hi!

I cannot set the hardware clock on Sup 7L-E (quad VSS) with the following SW version: 03.05.00.E.152-1.E

I have tried these commands, without any effect:

- calendar set
- clock update-calendar
- ntp update-calendar

core1#show ntp ass

  address         ref clock       st   when   poll reach  delay  offset   disp
+~10.9.47.81      10.9.47.100      4    101    256   377  7.973   1.952  7.484
*~10.9.47.100     84.206.109.4     3    221    256   377  9.000  17.181 18.468
+~10.9.32.53      78.79.86.76      5     52    256   177  9.000 -13.383  2.907
 * sys.peer, # selected, + candidate, - outlyer, x falseticker, ~ configured
core1#show clock
11:19:32.736 CET Thu Nov 26 2015


core1#sh clo
06:45:46.181 CET Tue Dec 1 2015
core1#sh cale
11:26:04 CET Mon Feb 25 1974

core1#cale set 06:45:00 01 dec 2015

core1#sh cale
11:26:04 CET Mon Feb 25 1974

Anyone has the same issue?

Thnaks!

[InayathUlla Sharieff]

Try removing ntp server and then set this and save the config.

-4500-1#calendar set 05:38:00 dec 1 2015

-4500-1#show cale
05:38:00 UTC Tue Dec 1 2015

[szaboandraslnx]

Unfortunately it does not helped:

core1#sh run | i ntp
 ntp source Vlan999
core1#sh cale
12:26:04 CET-DST Thu Jun 27 1974
core1#calendar set 14:45:00 dec 2 2015
core1#sh cale
11:26:04 CET Mon Feb 25 1974
core1#sh ntp ass

  address         ref clock       st   when   poll reach  delay  offset   disp
 * sys.peer, # selected, + candidate, - outlyer, x falseticker, ~ configured
core1#sh clo
.14:46:15.646 CET Wed Dec 2 2015
core1#sh cale
11:26:04 CET Mon Feb 25 1974