11-12-2021 01:33 PM
I am assuming this is a no straight off the bat, but i just inherited a network with a nexus 3000 series switch that i am able to get console to, but dont know the admin or any password. Is there a way to reset this without destroying the switches current config? I.e factory reset.
11-12-2021 01:52 PM
Hi @c.lennox ,
Try the following password recovery procedure.
Regards,
11-13-2021 01:50 AM
11-13-2021 05:09 AM - edited 11-13-2021 05:14 AM
Hi Chaps.
Thanks for your replies. I will give these a go on Monday. However am I right in assuming that both methods require login to the console, not just console access with a login prompt? Bear in mind that i dont have ANY logins at all for this switch. Also, i am not able to reboot this switch as it is in production. Bit of a pickle i know. This is why the previous team were asked to leave.
11-13-2021 06:15 AM
you need to pull the power cord and do the as suggested steps
12-16-2021 11:03 AM
Just thought i would come back and let you know none of the above worked. Thanks for the info though. Appreciated.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide