Hi all,
I have 2 switches that can not form stack cause version mismatch as error message below:
" Version '16.06.05' mismatch with Active's running version '16.09.04' for package"
I tried to upgrade both of them to cat3k_caa-universalk9.16.12.03a.SPA.bin
- The switch version '16.06.05' was successful to upgrade
- The switch version '16.09.04' was failed many time...
Could you help to point out possible issue please..., so far I did
- For the switch 16.06.05, it was a switch 2 in stack. I did no switch provision, renumber it to 1 and reload. After reload I am able to upgrade IOS
- For the 16.09.04, it was switch 1 in stack. Can not run no switch provision.... Upgrade failed message:
Checking IPC compatibility for candidate software
[1]: Finished install failed on switch 1
Checking status of install on [1]
[1]: FAILED: install failed in switch 1
SUCCESS: Finished install: Success on []. Failed on [1]
*Aug 14 22:01:39.138: %INSTALL-3-OPERATION_ERROR_MESSAGE: Switch 1 R0/0: provision: Failed to install package flash:cat3k_caa-universalk9.16.12.03a.SPA.bin, Error: [1]: FAILED: install failed in switch 1
*Aug 14 22:01:39.224: %INSTALL-5-OPERATION_COMPLETED_INFO: Switch 1 R0/0: provision: Completed install package flash:cat3k_caa-universalk9.16.12.03a.SPA.bin
Switch#
Many Thanks for your idea...
