10-13-2011 08:42 AM - edited 03-07-2019 02:47 AM
can't get my 3750-48-ps upgraded with IP services. It says it does not support the feature set. documentation leads me to believe that it should. Any thoughts?
10-13-2011 03:11 PM
Let me guess, you are upgrading from IP Base to IP Services using the "archive download-sw" command?
If this is correct then you need to do the following:
1. If you have enough flash space then the command is "archive tar /x tftp://
2. If you don't have enough space, then you need to delete the old IOS using the command "delete /f /r flash:
If your 3750 has 16 mb flash then the highest IOS you can run is 12.2(55)SE2 or later.
10-14-2011 05:23 AM
I actually discovered that when you are changing the feature set, that you have to add the /allow-feature-upgrade command. That was the issue and this resolved my problem.
Thanks for your response,
Kevin
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide