VLAN Question

[marc_eli4]

I set up a new VLAN on a new 3550 switch in my network that is in a different location and I cannot communicate with the other switches/routers or VLANs or the internet. I configured my new switch on the same vtp domain. I do not see the new vlan propogating to the other devices or vice vera i.e. cannot ping in or out. Also, My VoiP phone are not being configured from vlan 10. Here's my sh int trunk:

Port Mode Encapsulation Status Native vlan

Gi0/1 on 802.1q trunking 1

Port Vlans allowed on trunk

Gi0/1 1-4094

Port Vlans allowed and active in management domain

Gi0/1 1,40

Port Vlans in spanning tree forwarding state and not pruned

Gi0/1 1,40

[marc_eli4]

Update...I can now get to the internet only through the proxy server. But I am still having an issue ping to this workstation. It can ping out just fine.

[marc_eli4]

Also, I am able to ping the VoIP phone connected to that vlan switch, but not able to ping the pc.

[marc_eli4]

I finally got it to work. It was basically an issue with the PC I was using(maybe a bad NIC?), anyway I connected another laptop to the switch and it works fine, can ping both ways and get to the internet without the proxy