VLANS ISSUE on Cisco switches

[tnrs_tnrs]

Hi,

We have WS-C4507R+E switch and WS-C2960X-24PS-L and we configured VLANs and VTP on 4507 switch we connected 2960X switch on 2960 we configured VTP vlan are communicated on 2960 switch.

Vlan details :38,40.41.42,43,and 44 

4507 switch ip 192.168.38.1

2960 switch ip 192.168.38.2

Ip phone ip 192.168.44.2

Server ip 192.168.44.3

all vlan s are communication is running on both switches only data. On 2960X POE switch ip phone given ip 192.168.44.2  we are unable to ping ip 192.168.44.2 from other vlans we able to ping server ip 192.168.44.3 ip any configuration required on ip phone suggest me.

[Walter Astori]

I suppose that the 192.168.44.2 is on vlan 44. Do you have router in a stick ? The port between 4507 switch and 2960 switch are in trunk mode ?

[tnrs_tnrs]

Hi,

Thanks for your replay

We have 2 routers in this scenario

1st router ip address 192.168.38.1 MPLS Router ,Second 192.168.38.3 2911 V K9  4507 switch ip 192.168.38.2 and 2960X poe switch ip 192.168.38.27