Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I have a Cisco 5508 WLC (8.3.150 release) with 25 WLAN SSID configured and 352 Acess Point. In particular there is a WLAN SSID configured as Layer 2 Security as 802.1x (WEP). These 352 Access Point are installed in more location and each locatio...
HI, here there is the complete Debug made on WLC with debug MAC .... . This is the reply for you help on my post "Cisco WLC 5508 WLAN SSID 802.1x. Thank you in advance for your help68:ec:c5:XX:XX:XX = MAC ADDRESS CLIENT00:c1:64:XX:XX:XX = BSSID MAC A...
Here there is the debug complete made on the WLC with the command debug mac ... 1. You have the right wlan-vlan mapping for that site (If local switching) Yes it's correct 2. If the vlan has ip helper enabled (if using an external DHCP server) ...
Thanks, i modified my configuration so :no nat (INSIDE,OUTSIDE) source static VPNnonat.-SRC VPNnonat-SRC destination static VPNL2L-DST VPNL2L-DSTAfter with capture ASP type asp-drop, i see the flow from 10.168.0.85 to 94.125.239.242. I studied the co...
When i try to ping the destination 10.168.0.85 from my inside host 192.168.93.164 (NAT-SRC to 10.195.10.164) i can see on my ASA this output :peer address: 78.6.254.7 Crypto map tag: outside_map, seq num: 145, local addr: 94.125.239.251 acces...
Why the MTU is set to 9000 ? Do you have set jumbo frame ? The file transfer between two computer does support TCP offload ? The MTU size 9000 are set on switch ?
