10-28-2012 07:19 AM - edited 03-07-2019 09:43 AM
i have 2 RV048 and one RV016
I have established VPN gateway to gateway tunnels; all routers use functional DYNDNS
IPrange site 1 192.168.123.1-254 external adres x.y.z.w
IPrange site 2 192.168.124.1-254 external adres a.b.c.d
IPrange site 3 192.168.122.1-254 external adres e.f.g.h.i
site 1 with 192.168.123.x has two win 2008R2DC servers, running AD, DNS, DHCP, RRAS with address 192.168.123.4-5
i can ping the routers only if i add the route to it but cannot ping further (route add command)
if i dont establish the route then nothing pings
How can i use the tunnel to connect to the servers in site 1
thanks for your benevolent answer
rony
Solved! Go to Solution.
10-28-2012 03:36 PM
IPSec tunnels don't transmit routing protocols. You'll need static r outed on each router for the other sites.
Sent from Cisco Technical Support iPad App
10-28-2012 03:36 PM
IPSec tunnels don't transmit routing protocols. You'll need static r outed on each router for the other sites.
Sent from Cisco Technical Support iPad App
10-29-2012 02:57 AM
Thanks, i took your advice and did the routing on BOTH ends now on every individual server, using route add command and i can use the servers as needed
however, this needs to be done on each computer, which is possible nbut needs interaction.
i havent been able to used the static routing of the router. What am i doing wrong here?
192.168.123.0 is the location of the servers on site 1
192.168.122.254 is the router's adres from where i want to connect to site 1
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide