Hello,
Please can someone help me with vrf lite with ospf. I am trying to ping IP's using vrf lite and SVI's. The devices are connected via trunk ports. This configuration works fine when using regular ospf. But for some reason (obviously misconfiguration) I am not seeing the routes from the peers.
switch1#sh run int te2/8
Building configuration...
Current configuration : 241 bytes
!
interface TenGigabitEthernet2/8
description Link to switch2
switchport mode trunk
end
router ospf 1 vrf red
network 172.16.10.0 0.0.0.255 area 0
!
cr01.srv-mk#sh run | b ip vrf red
ip vrf red
description ## Red VRF ##
!
switch1#sh run int vl10
Building configuration...
Current configuration : 85 bytes
!
interface Vlan10
ip vrf forwarding red
ip address 172.16.10.1 255.255.255.0
end
switch1#sh ip ospf neighbor
Neighbor ID Pri State Dead Time Address Interface
172.16.1.2 1 FULL/DR 00:00:33 172.16.10.2 Vlan10
cr01.srv-mk#sh ip route vrf red
Routing Table: red
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
a - application route
+ - replicated route, % - next hop override
Gateway of last resort is not set
172.16.0.0/16 is variably subnetted, 3 subnets, 2 masks
C 172.16.1.1/32 is directly connected, Loopback1
C 172.16.10.0/24 is directly connected, Vlan10
L 172.16.10.1/32 is directly connected, Vlan10
switch2#sh run int te2/8
Building configuration...
Current configuration : 241 bytes
!
interface TenGigabitEthernet2/8
description Link to switch1
switchport mode trunk
end
router ospf 1 vrf red
network 172.16.10.0 0.0.0.255 area 0
!
switch2#sh run | b ip vrf red
ip vrf red
description ## Red VRF ##
!
switch2#sh run int vl10
Building configuration...
Current configuration : 85 bytes
!
interface Vlan10
ip vrf forwarding red
ip address 172.16.10.2 255.255.255.0
end
any help would be greatly appreciated.
