07-24-2012 11:36 AM - edited 03-07-2019 07:57 AM
i'm wanting to know with this setup, will a loop occur?
my thought is that the red lines (fiber) would be the main path, and the blue (fiber) will be the backup path
07-24-2012 11:45 AM
Only Red and Blue don't form any loop. There are yellow links too correct? if so, then there are loops.
HTH.
07-24-2012 11:54 AM
yes, the yellow links are just patch cables.
07-24-2012 11:58 AM
Hi,
Thanks to Spanning Tree algotihm there is not a loop, because the switch negotiate BPDU states and connection between switch 3 and 4 is broken (disabled).
You must carefully set the spanning-tree priotity and port-prority.
Attn.
Roger Majo
07-24-2012 12:00 PM
Hi,
You must take care with patch cables.
If they are fiber optic or if they are UTP Cable the results can vary.
Fiber optica cables has priority over UTP cable.
Attn.
Roger Majo
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide