HI Guys,
I have 2 Wireless Access Points WAP4410N. Iam very new in Using these Wireless ACCESS points. initial configuration I have done with the help of Starting guide. Here i want to know few things
1) Is these can be configured By CLI mode as of now i used GUI mode.
2)i want to give connected users of wifi from the DHCP loop created in L3 switch (is a DHCP server). where wifi point is connected to a port of L3 switch.
3) How can i give connected wifi users from DHCP Pool with different ip adress subnet to internal users and guests. is this can be configured here on product i have or not?
if yes . can you please exlain me or gvve me detaiuled stuff.
4) I Want to give access to my employees internal server through WI-fi . where i have L3 switch connected to a server gi 1/0/1 (10.10.10.10) and wifi at port gi 1/0/2. how can segregate or seperate the internal user employees with access to servers and gust users directly access internet through gateway 10.10.11.1 connected to L3 switch. where wifi port has to be given a different VLAN no.
wifi-----------------------L3 switch--------------------------router
/
/
server
