wrong VLAN '0' on interface '1', management VLAN = '1', AP Manager VLAN = '1', dropping the packet

[Dhikra Marghli]

I have e message erreur in Moblity express cisco 1815 :

Discovery Request received on wrong VLAN '0' on interface '1', management VLAN = '1', AP Manager VLAN = '1', dropping the packet

i have AP ==> switch layer 2 1815 ==> ME 1815 WLC ===> router ( server DHCP )

i onfigured port switch to WLC ME 1815

interface GigabitEthernet1/0/15
switchport trunk native vlan 999
switchport trunk allowed vlan 1,999
switchport mode trunk
spanning-tree portfast

Interface GigabitEthernet1/0/2
description » AP «
switchport mode access

But , when i verified WLC i have a show :

(Cisco Controller) >show ap join stats summary all 

Number of APs.............................................. 2 

Base Mac AP EthernetMac AP Name IP Address Status
28:ac:9e:e3:23:20 N A AP28AC.9E89.3DB8 1.1.1.23 Not Joined  ????????????
a0:93:51:17:94:00 N A AP780C.F0DB.2A90 1.1.1.22 Not Joined ??????????????

so then the message error : AP is not joind to ME :

i don't have any idea to allow AP jointed to WLC , so i need e expert resolve this problem of message error 

thanks in advance 

[srkala]

Please share the output of "show interface summary" from controller CLI. The AP is getting IP address from DHCP or statically assigned ?

From AP cli, share the output of "show ip int br"

[Dhikra Marghli]

1)  for ME 1815 i downloed ap1g5-k9w8-tar.153-3.JI3  and 8.8.100 ==>Joined  statut 

but AP (  number 2 )  1815 id dwolnd 153-3.j4 and 8.8.100 ===> is not joined

So ========> do you think and  i ask you f i downled ap1g5-k9w8-tar.153-3.JI3 ============> then AP can joined to ME ( moblity express cisco )  to controlleur  ??????????????

thanks in advance 

[Dhikra Marghli]

the AP  get ip address from dhcp router 

[Leo Laohoo]

Could you, at least, try a different version of ME? Like 8.5.140.0 instead?

[Sandeep Choudhary · Accepted solution]

Activate the license and accept EULA on WLC.

Regards

Dont forget to arte helpful posts