WS-C2960X-48FPD-L connect a sfp GI on a port Te

[hi.sadiki]

Hello Guys,

Can any one help please,

In my new WS-C2960X-48FPD-L :

Te1/0/1                      notconnect   1            full    10G Not Present
Te1/0/2                      notconnect   1            full    10G Not Present

Can those ports take a GI  SFP 1000baseSX , or maybe there is something to change first ?

Many thanks,

[Reza Sharifi]

Hi,

Yes, the you can use SFP 1000base SX in the 10 Gig ports.

HTH

[Julio E. Moisa]

Hi

These are the supported SFP per device. Some devices support 1G or 10G on the SFP slots.  

http://www.cisco.com/c/en/us/products/switches/catalyst-2960-x-series-switches/models-comparison.html

Reference:

http://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/GE_Tx_Matrix.html#_Toc476298506

Catalyst 2960 X Series
Network Device	Transceiver Model	Minimum Software Release Required
		DOM Support	Software Release
WS-C2960X-24TS-LL WS-C2960X-48TS-LL	GLC-LH-SMD GLC-SX-MMD GLC-EX-SMD1 GLC-T GLC-TE GLC-LH-SM GLC-SX-MM GLC-GE-100FX	15.0(2)EX	15.0(2)EX
WS-C2960X-24PSQ-L	GLC-BX-D GLC-BX-U GLC-LH-SMD GLC-SX-MMD GLC-EX-SMD1 GLC-ZX-SMD GLC-T GLC-TE GLC-ZX-SM GLC-LH-SM GLC-SX-MM	15.0(2)EX	15.0(2)EX
WS-C2960X-24PS-L WS-C2960X-24TS-L WS-C2960X-48TS-L WS-C2960X-48LPS-L WS-C2960X-48FPS-L WS-C2960X-24TD-L WS-C2960X-24PD-L WS-C2960X-48TD-L WS-C2960X-48LPD-L WS-C2960X-48FPD-L	GLC-BX-D GLC-BX-U GLC-LH-SMD GLC-SX-MMD GLC-EX-SMD1 GLC-ZX-SMD GLC-T GLC-TE GLC-ZX-SM GLC-LH-SM GLC-SX-MM CWDM-SFP GLC-GE-100FX	15.0(2)EX	15.0(2)EX

GLC-T is used for copper and it works at 1GB, GLC-SX-MMD support 1G as well. SFP+ represents 10G

Hope it is useful

:-)