I have a client has a WS-X6548-GE-TX blade with some bad ports. I am replacing the blade but notice a difference in the FW, SW & HW versions from the sh mod output. The client is concerned that a versions may create a problem. I have searched and found 1 procedure to upgrade the firmware if the version is between 4.0 & 9.0
Here is the show mod of the blade getting removed:
NY17RS001#show mod
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
5 2 Supervisor Engine 720 (Active) WS-SUP720-3B SADXXXXXXXX
9 48 SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-TX SALXXXXXXXX
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ ------- ---------
5 000e.84e5.f838 to 000e.84e5.f83b 4.1 8.1(3) 12.2(18)SXD3 Ok
9 001d.45bb.f260 to 001d.45bb.f28f 11.3 7.2(1) 8.3(0.156)RO Ok
Mod Sub-Module Model Serial Hw Status
--- --------------------------- ------------------ ------------ ------- -------
5 Policy Feature Card 3 WS-F6K-PFC3B SADXXXXXXXX 1.1 Ok
5 MSFC3 Daughterboard WS-SUP720 SADXXXXXXXX 2.2 Ok
Mod Online Diag Status
--- -------------------
9 Pass
Here is the show mod of the blade getting installed:
Router#sh mod
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
5 2 Supervisor Engine 720 (Active) WS-SUP720-3B SADXXXXXXXX
9 48 SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-TX SADXXXXXXXX
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------- ------ ---------
5 0011.92e7.5cc4 to 0011.92e7.5cc7 4.1 7.7(1) 12.2(18)SXD7 Ok
9 0003.feae.5d3c to 0003.feae.5d6b 7.0 7.2(1) 8.3(0.156)RO Ok
Mod Sub-Module Model Serial Hw Status
--- --------------------------- ------------------ - ----------- ------- -------
5 Policy Feature Card 3 WS-F6K-PFC3B SADXXXXXXXX 1.1 Ok
5 MSFC3 Daughterboard WS-SUP720 SADXXXXXXXX 2.2 Ok
Mod Online Diag Status
--- -------------------
5 Pass
9 Pass
Router#
Thanks in advance.
Mikec5000
