cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1163
Views
0
Helpful
4
Replies

WS-X6548-GE-TX (VSS) Support

mali786
Level 1
Level 1

I form a VSS between two 6509-E chassis with sup 720. I have WS-X6548-GE-TX module in each chassis. After configuring the VSS i found that this module is not compatiable with VSS. Is there any way i can use these modules ? any upgrade or something ?

Please help.

4 Replies 4

Reza Sharifi
Hall of Fame
Hall of Fame

unfortunately, only 67xx series and 68xx is supported.  You may want to talk to Cisco to trade that in with a 6700 series line card.

http://www.cisco.com/en/US/customer/prod/collateral/switches/ps5718/ps9336/prod_qas0900aecd806ed74b.html

HTH

Thanks for your reply.

Ankur Arora
Level 1
Level 1

Hi Muhammad,

The below link contains the detailed description of the hardware requirments:

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/vss.html#wp1053927

I also found this:

Product ID

(append "=" for spares)

Product Description

Minimum
Software
Versions

WS-X6548-GE-TX
WS-X6548V-GE-TX
WS-X6548-GE-45AF

48-port 10/100/1000 Mbps

RJ-45

CEF256

WS-X6548-GE-TX supports:

WS-F6K-VPWR-GE

WS-F6K-GE48-AF

WS-F6K-48-AF

WS-X6548V-GE-TX has WS-F6K-VPWR-GE

WS-X6548-GE-45AF has WS-F6K-GE48-AF or WS-F6K-48-AF

With WS-F6K-GE48-AF, supports up to 45 ports of ePoE (16.8W).

QoS port architecture (Rx/Tx): 1q2t/1p2q2t

Number of ports: 48
Number of port groups: 2
Port ranges per port group: 1-24, 25-48

The aggregate bandwidth of each set of 8 ports (1-8, 9-16, 17-24, 25-32, 33-40, and 41-48) is 1 Gbps.

With Supervisor Engine 720-10GE (not supported in VSS mode)

12.2(33)SXH

With Supervisor Engine 720
(except WS-F6K-GE48-AF or WS-F6K-48-AF)

12.2(17a)SX

WS-F6K-GE48-AF or WS-F6K-48-AF
with Supervisor Engine 720

12.2(17d)SXB

With Supervisor Engine 32

12.2(18)SXF

WS-F6K-GE48-AF or WS-F6K-48-AF
with Supervisor Engine 32

12.2(18)SXF

So this module is clearly not supported.

Thanks

Ankur

"Please rate the post, if found useful"

Yeah, i got the answer already. This module is not supported in VSS.

6748 with DFC3C is an option for VSS

Thanks for your reply.

Regards,

Review Cisco Networking products for a $25 gift card