11-13-2012 10:50 AM - edited 03-07-2019 10:01 AM
I plan to use a GLC-LH-SM= on one side of a 50micron MMF connection (with a mode conditioning cable). Does anyone know what X2 module on the other end I need to get the link up and running? The distance is less than 550 meters.
Thanks,
Bobby Grewal
11-13-2012 11:04 AM
GLC-LH-SM is a 1 Gbps module and X2 is 10Gbps, problem here....what are you trying to do, 1 Gbps or 10 Gbps
11-13-2012 11:22 AM
1 Gb.
11-13-2012 11:22 AM
The X2 should be able to do 1Gb over 50 micron MMF, correct?
11-13-2012 12:32 PM
Yes, as long as you have multimode optics. X2 is 10Gig, so if you want to go from 10X2 to 1Gig SFP than you need a TwinGig converter.
What are the devices you are trying to connect together?
HTH
11-13-2012 12:50 PM
6500 to 2960S. I don't think the twingig converter works with the 6500.
11-13-2012 12:58 PM
Correct. The 6500 does not support TwinGig converter.
See table 9 in this link:
HTH
11-13-2012 01:42 PM
There is also the distance, you cannot support 10Gbps on MMF over 500m
You can :
1. Install a new SMF and run 1 Gbps or 10Gbps on it,
2. Connect your 6500 and 2960S with a 1Gbps link in 1GbE ports (no X2)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide