03-05-2015 06:20 AM - edited 03-18-2019 04:08 AM
Dear Community,
does anybody know if/when it's possible to use 802.1X authentication with the TelePresence InTouch 10?
It perfectly works on the C/SX codecs and as long as the Panels are connected directly to the Codec, there is no issue. But on some codecs, direct pairing is not possible and therefore I would need 802.1X authentication from the panels itself.
Thanks in advance!
Best regards
Alex
03-08-2015 09:42 PM
Hello Alex!
I am not aware that the feature exists, nor if its on the roadmap or even a feature request exists.
There might have been a discussion around this in this forum before.
I would recommend that you talk to your Cisco contact to file a feature request.
Please remember to rate helpful responses and identify
03-28-2015 06:20 AM
Hello!
We've just launched an Ask the Expert event on 802.1x
Perhaps post your question with Javier as well!
Thank you!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide