c 60 with 3 camera and content Server

[Yasir Vistro]

hi All

We have C 60 with software version TC3. We connect 3 cameras. 1^st  2 Camera connect on HDMI working fine, 3rd one  connect on BNC  how I select the source to Camera 3 ?

We have contect Server, is it any option on contect  Server  Fix the timing  Start recoding and End Recoding ?

Yasir Vistro        

[Yasir Vistro]

Dear Teck

BNC  out for  IN Video Modulator... only AV INPUT in modulator.

as for Camera concern ... The distance between 3rd Camera and Codec approx  80 feet.  .

Regards

Yasir Vistro

[Martin Koch]

There are some ways to transport hdmi/video signals over long distances, ask an AV integrator how to handle such long distances.

With the BNC out on the C60 you do not get a good video quality as its max. PAL(sd),

so you really want to look into either using hdmi, dvi, vga or replacing the monitor.

As you connected 4 sources, they will not work at the same time and you might face limitations

regards what you can do with the C60 without an external control device (and/or an external video switcher).

A C90 might be also of interest for this kind of setup

I would strongly recommend that you search for a Cisco (most likely an old Tandberg) Partner with

AV, integration and programming skills to help you here.